Fiber orientation: 0/90 °
Dimensions: 1200 x 550 mm²
Thickness: 5,0 mm
CF/PEEK boards 5mm
woven carbon fiber fabric 3K, Fiber T300, Matrix Victrex PEEK
Fiber content ca 50 Vol.%
nominal thickness 5 mm
dimensions 1200 x 550 mm²
Haufler Composites produces PEEK sheets using the press method for extremely demanding applications.
PEEK is a thermoplastic with high temperature resistance. In addition to the familiar properties of carbon fibre, such as high strength and stiffness, the PEEK matrix is characterised by extremely high resistance to chemicals, low wear and moisture absorption, excellent sliding properties and a maximum operating temperature of approx. 260 °C (depending on the application).
Haufler Composites produces carbon PEEK plates from fabrics with a fibre content ratio of approx. 50 % with a fibre orientation of 0°/90° or multidirectional fibre orientation of 0°/90°/+-45°.
Fibre orientation
0/90°
Fibre
HT-Carbon, 3K
Matrix
PEEK (Polyetheretherketon)
Fibre volume content [%]
ca. 50
Density [g/cm³]
ca. 1,5
tensile strength [MPa]
600
elastic modulus [GPa]
55
compressive strength [MPa]
500
CTE 0°/90° [1/K]
5 x 10E-6
Max. service temperature [°C]
260°C (low stress)
The information in our technical documents is based on practical experience and is reliable, but customers should still check for themselves whether our products are suitable for their intended processes and applications.Other matrix systems (both thermoset and thermoplastic), fibre types or sizes available on request.
Further Information: Carbon PEEK boards
Do you have questions about the product or would you like more detailed information? Simply complete the form below.